Home Company Products Contact Publications Distributors  

Dioxin MonitoringSystem General Description Purpose and Application NEW - Fine Dust Technical Details   Components Technical Data Sampling Method Software Laboratory Conformity to EN 1948 Conformity to EPA Method 23 References WindSelect+ Genius 5

DioxinMonitoringSystem^®

Complete Surveillance of Dioxin Emissions

---

Software

 

Comfortable sampling configuration routines before sampling start

Manual dioxin measurements for short term sampling fulfiling the minimum requirements have very simple control mechanism. Stand alone high quality measurement for long periods needs sophisticated software, which controls the measurement without operator.

 

---

Features:

---

 

Control of isokinetic

 

Adjustment of best sampling conditions

 

Recognition of stand by periods and switching to stand by

 

Documentation of the measurement

 

Report print out

 

Leak test

 

For calibration and maintenance the software guides the operator by automatic routines to guarantee the performance of the instrument. After training, the measurement engineer can do this without the need of external service.

 

Stand-by

Long term measurements need clear rules, how to proceed the sampling during start up/stop down-periods of the incinerator. The rules are defined by a configuration sheet.

 

 

 

Desorption - improved rinsing technique

Manual measurements need the rinsing of the probes after the end of the measurement. The rinsing shall include precipitated dioxins from the probes. The disadvantage of the rinsing is a higher blank value, which influences the detection limit of the method.

 

The DioxinMonitorigSystem^® uses an automatic routine for this job. At the end of the measurement the probes are thermal cleaned to evaporate the dioxins and to purge them into the filter cartridge. This improved method enables very low detection limits.